Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites

The plummer block bearing unit SBPP-201 consists of the radial insert ball bearing SB201 and the steel sheet housing PP201.

the bearing insert has an inner ring extended on one side and a spherical outside surface profile of the outer ring and is fixed with a grub screw; the galvanized plummer block housing (steel sheet) is equipped with two bores for fixing

suitable for low loads; misalignments can be equalized by spherical bearing seat

steel sheet is extremely favourable and space-saving

its temperature resistance ranges from -20°C up to +120°C, in case of plastic seal up to +100 degrees Celsius


SBPP Series - Set Screw Locking Type

Dimension and Parameters
Request Quotation
SBPP Series - Set Screw Locking Type SBPP Series - Set Screw Locking Type
 SBPP207-22
  • Unit No. :
     SBPP207-22
  • Shaft Diameter
  • d :
    1-3/8 in
  • Shaft Height
  • H (in) :
    1.5625
  • Mounting Hole
  • Center-to-Center J (in) :
    4.1732
  • Housing Length
  • L (in) :
    5.0787
  • Housing Width
  • A (in) :
    1.6535
  • Basic Dynamic Load
  • Rating (Cr) lbs :
    5777.59
  • Basic Static Load
  • Rating (Cor) lbs :
    3439.58